How does Aeroseal seal ducts from the inside?
A fan pressurizes the ductwork and turns liquid sealant into a fine aerosol. As air rushes out through each leak, the sealant particles stick to the edges of the hole and build up until it's closed, so it seals only where air escapes.
Watch the segment
Duct Brothers on YouTube · Sep 13, 2024 · 6:00 · Trevor
Where ducts leak
Trevor built the demo to copy what we find in real homes. Every duct junction that wasn't sealed leaks at all four corners, because it's just metal on metal. Seams have poor connections, and flexible duct gets snagged on nails and torn.
Like a scab on a cut
The sealant doesn't coat the whole inside of the duct. It travels with the air, and only where air is escaping does it collect, first at the edges of a hole, then toward the middle, until the hole is closed.
Small holes close quickly. In the video, the largest opening took about 13 or 14 minutes to seal completely, shown sped up.
“It goes in there and only seals where the air is escaping.”
Full transcript
Lightly edited for reading: filler words and repeats taken out, nothing reworded.
Read the transcript
Trevor: Hey everybody, it's Trevor from Duct Brothers. Right now I'm about to show you a live demonstration on some clear ductwork, so you can see exactly how our sealing process works.
Trevor: Take a look right here next to me. I've got the fan box that we use to pressurize the ductwork and to inject the sealant that ultimately goes through your ductwork and into the cracks and leaks, causing them to seal. Every ductwork junction leaks at all four corners when it isn't sealed, because it's just metal on metal, so we're simulating that here. Lots of pieces of ductwork have poor connections at the seams, and so that's what we're going to simulate with this next cut. And even flexible duct will get snagged on nails and have tears, things like that.
Trevor: The Aeroseal fan box vaporizes the liquid glue and turns it into an aerosol, which then blows through the inside of the ductwork and starts to escape through the holes to create those plugs. Here's an example of that as well. We have this part sped up just a little bit, I think it's about 2x right now, but you can actually see the sealant start to coagulate on the edges of that opening. And here's some of those first corners that we had done previously. It basically forms and looks kind of like how your blood creates a scab, so it goes in there and only seals where the air is escaping.
Trevor: In all reality, every single one of those holes is plugged. 366 feet per second of air losing beforehand, and now nothing. This is that larger opening, so it's not quite sealed yet, but it's pretty close. This part is going to take a minute. We time-lapsed an entire sealing from start to finish. We tried to keep it as still as possible, but it's going to shake a little bit. We have it at four times speed, so I think it actually took about 13 or 14 minutes for it to seal this large opening. But yeah, go ahead, take a look. You can skip ahead a little bit if you want to, or even speed up the video even more, and you should be able to actually watch the edges of that sealant start to coagulate and kind of form towards the middle.
Where this comes up
Want to know what your ducts are losing?
Tell us what's going on. We'll quote it by phone, or come out and look at your system and your ducts together.
By phone or in your home. No obligation.